Raspberry Pi Image

Note

• This Raspberry Pi system image is a packaged version from November 2024, specifically designed for FLY-TFT display compatibility, no system optimization has been performed.

warning

SD card注意事项:

• 容量必须不小于16GB或不大于128GTF卡
• TF卡的传输速度必须为class10级或class10级以上，建议使用闪迪等品牌的TF卡

Note

• Due to server issues, please do not casually update the system or Klipper
• This image is suitable for Raspberry Pi 3B/3B+/4B/CM4/5B
• This image is based on bookworm with various services installed
• This image has the TFT display pre-installed and enabled by default. If you do not need the TFT display, you need to manually modify /boot/config.txt

Important Notice

• Please note the downloaded system needs to be extracted, not just changing the extension or directly flashing it!!!!
• Flashing without extraction will not boot!!!!

System Download

Raspberry Pi Image

tip

This system comes pre-installed with services such as Klipper, Moonraker, and Klipperscreen, ready to use out of the box

• Click on the download link below
• Loading...

Regular User

Default username: pi

Default password: pi

Important Notice - Display Usage

Important Notice

• If you are not using the TFT display, you need to modify the config.txt file under the bootfs partition after flashing the system

• Open config.txt
  
• Locate the following configuration on line 52
  
• This will disable the TFT display which is enabled by default