System Image Burning and Configuration Guide
Step 1: System Image Burning
1. Enter the System Configuration Interface
After launching the software, select the System Configuration option from the left-hand menu bar to enter the system burning interface.
2. Connect Storage Device
Connect the storage card to be burned to the computer's USB port using a card reader.
💡 Suggestion: Using a USB 3.0 or higher interface can significantly improve burning speed.
3. Identify Storage Device
Click the Refresh button next to Storage Device to ensure the system correctly identifies the connected storage card.
4. Select Device Model
Click Device Selection and choose the corresponding configuration scheme based on the device model you are using.
5. Execute Burning Operation
After confirming the device selection is correct, click the Start Burning button.
- This operation will permanently erase all data on the storage card!
- Please ensure important files are backed up before burning.
- Do not disconnect the device during the burning process.
6. Complete Burning
Wait for the burning progress to complete. When the interface displays a "Complete" prompt, it indicates the system image has been successfully written.
Step 2: System Configuration
✅ Operation Tip: After completing the selection and modification of all configuration items, be sure to click the Manually Write Configuration button to ensure all settings are correctly saved to the system card.
1. Enable Configuration Function
Click the Enable System Configuration switch to activate the system configuration options.
2. Basic Settings
Configuration File Management
- Only supports selecting folders.
- Configuration files within the selected folder will be automatically copied to the system card.
- Configurations will be automatically loaded upon system startup.
Wi-Fi Network Configuration
Enter the available Wi-Fi name and password to configure the device's network connection.
Web Interface Selection
Currently supports the following web UIs:
- Fluidd - Lightweight Klipper web interface.
- Mainsail - Feature-rich Klipper web interface.
Display Settings
Configure display parameters according to the type of connected monitor.
3. Advanced Settings
Device Identification
Set a personalized printer name for easy network identification.
Camera Function
Configure camera service parameters to enable video monitoring functionality.
Regional Settings
Set the system language and corresponding time zone to ensure accurate time display.
Communication Settings
Configure the CAN bus transmission rate to optimize communication between devices.
Friendly Reminder: After completing all configurations, safely eject the storage card and then insert it into the target device to boot the system.