WiFi Instructions

Notes

Notes

• Confirm whether the back of the screen has WiFi before using it
• A memory card is also required to use the WIFI functionality
• The capacity of the TF card must not exceed 32G, and it is recommended that the transfer speed of the TF card must be class10 or higher. It is recommended to use TF cards from brands like SanDisk.

Determine if the Screen Supports WIFI

• This screen comes in two versions: one with WIFI and one without. Only the version with WIFI can use the WIFI functionality.
• Below is a method to check if the screen has WIFI:
  

Preparations

Memory Card Formatting Software:

• It is recommended to use the SDFormatter software for formatting. Other formatting software might cause failures.
• This software can be used on Windows and supports FAT32 formatting.
• Download link:
• SD Card Formatting Software

Format the Memory Card and Download Configuration Files

• Use the SDFormatter software for formatting
  • After formatting, the memory card will be emptied, please ensure to backup important data

Download the Screen's WEB Configuration File

• Please note that the downloaded screen WEB configuration file needs to be extracted
• Copy all the extracted files to the root directory of the memory card
• Click the link below to download the screen WEB configuration file
• Loading...
• Insert the memory card into the screen's TF card slot

Install the TF Card

• Insert the memory card into the TF card slot of the screen
• Then power on the device
  

Enable WIFI and Connect to the Network

• Tap the bottom right corner of the screen:
  • Tap the More button at the top right corner of the screen
    
  • Tap the Screen set button at the top right corner of the screen
    
  • Tap the WIFI icon on the right side of the screen
  • Tap WIFI setup on the screen
    
  • Tap the button at the top right corner of the screen to enable the WiFi function. If the screen does not support WiFi, the WIFI cannot be enabled
    
  • After connecting to WIFI, tap the three dots at the top right corner of the screen
  • After tapping, the screen's IP address will be displayed. If an IP address is shown, it means the connection was successful
    

Notes

• If the screen does not support the WIFI function, WIFI cannot be enabled
• If the IP address is not displayed after connecting to WIFI, it may be due to network issues, possibly caused by a dual-band combined router
• If the following message appears after displaying the IP, it may indicate an issue with the WEB configuration file or the TF card