WiFi Usage Instructions

Precautions

Precautions

• Before using WiFi, first confirm whether the back of the screen has WiFi
• Using the WiFi function requires preparing a memory card
• The capacity of the TF card should not exceed 32G, and it is recommended that the transfer speed of the TF card must be class10 or higher. It is recommended to use TF cards from brands like SanDisk.

Determine if the Screen Supports WiFi

• This screen comes in two versions: with WiFi and without WiFi. The version with WiFi can use the WiFi function.
• Below is the method to determine if the screen has WiFi:
  Loading...

Preparations

Memory Card Formatting Software:

• It is recommended to use the SDFormatter software for formatting. Other formatting software may cause usage failure.
• This software can be used on Windows and supports FAT32 formatting.
• Download link:
• SD Card Formatting Software

Format the Memory Card and Download Configuration Files

• Use the SDFormatter software for formatting.
  • After formatting is complete, the memory card will be cleared. Please ensure to back up important data.

Download the Screen WEB Configuration File

• Please note that the downloaded screen WEB configuration file needs to be extracted.
• Copy all extracted files to the root directory of the memory card.
• Click below to download the screen WEB configuration file.
• Loading...
• Insert the memory card into the screen's TF card slot.

Install the TF Card

• Insert the memory card into the screen's TF card slot.
• Then power on and boot up.
  Loading...

Turn on WiFi and Connect to the Network

• Click the button at the bottom right of the screen.
  • Click the More button at the top right of the screen.
    Loading...
  • Click Screen set at the top right of the screen.
    Loading...
  • Click the WiFi icon on the right side of the screen.
  • Click WiFi setup on the screen.
    Loading...
  • Click the button at the top right of the screen to turn on the WiFi function. If the screen does not support the WiFi function, WiFi cannot be turned on.
    Loading...
  • After connecting to WiFi, click the three dots at the top right of the screen.
  • After clicking, the screen's IP address will be displayed. If the IP address is displayed, it indicates a successful connection.
    Loading...

Notes

• If the screen does not support the WiFi function, WiFi cannot be turned on.
• If the IP address is not displayed after connecting to WiFi, it may be a network issue, possibly caused by a dual-band combined router.
• If the following prompt is displayed via IP, it may indicate an issue with the WEB configuration file or the TF card.

Loading...