Skip to main content

Introduction

Fly_WiScreen is a high-end Klipper control screen developed by Guangzhou Meilun Electronic Technology Co., Ltd. (FLY3D). It supports two firmware modes (WIFI/Serial), providing users with flexible connection options: it can connect to a Klipper host via WIFI or communicate directly with systems like FlyOS-FAST through a serial port. The screen responds quickly, features a 7-inch IPS capacitive touchscreen, and supports file transfer via USB or TF card, delivering a smooth and efficient operating experience.

Loading...

Core Features​

WIFI Firmware Mode​

  • Network Connection: Supports searching for and connecting to Klipper hosts within the local network via WIFI.
  • File Transfer: Supports uploading print files to the printer using the onboard USB interface or TF card slot.
  • Cluster Control: Supports master-slave mode, facilitating synchronized management and control of multiple printers.
  • Custom Macros: Supports custom operation macro commands, simplifying debugging and complex operation processes.

Serial Firmware Mode​

  • Direct Connection: Supports direct connection to FlyOS-FAST systems or hosts equipped with the Moon2Uart plugin via serial port.
  • Custom Macros: Supports custom operation macro commands, simplifying debugging and complex operation processes.
  • Advanced Features (FlyOS-FAST Exclusive):
    • Power failure recovery prompts and resumption.
    • Control and configuration of host WIFI connection via the screen.
    • Setting extruder nozzle size and filament type via the screen.
    • File management, model slicing, and print queue setup.
    • Viewing host system version information, etc.
  • Notes:
    • The onboard WIFI function will be unavailable in this mode.
    • The onboard USB and TF card slots can only be used for firmware updates and not for regular file transfer.

Product Specifications​

  • Processor: Allwinner T113-S3, dual-core Cortex-A7, up to 1.2GHz
  • RAM: Integrated 128MB DDR3
  • Storage: 128MB NAND Flash
  • Display: 7-inch IPS capacitive screen, resolution 1024x600, supports multi-touch
  • External Interfaces: USB 2.0 x1, TF card slot x1
  • Wireless: Supports 802.11b/g/n protocol
  • Power Supply: Rated voltage 5V
  • Extended Power: The 5V power port can connect to an external charging module, supporting modification for battery power.

How to Choose Firmware?​

  • If you need to wirelessly connect multiple Klipper printers and transfer files directly from the screen, choose the "WIFI Firmware".
  • If you use the FlyOS-FAST system and desire deeply integrated features like power failure recovery and screen-side WiFi configuration, choose the "Serial Firmware".
  • For firmware download and flashing instructions, please refer to the subsequent "Firmware Update" chapter.
Loading...