Skip to main content

Fly-Pi-lite2 Host

The Fly-Pi-lite2 is a Klipper host designed for beginners, integrating a deeply optimized system and plugins. It is ready to use out of the box, helping users quickly set up a 3D printing control environment.

Loading...

Product Features​

  • Processor: Allwinner H3 Quad-core Cortex-A7
  • Graphics Processing: Mali-400 MP2
  • RAM: 512MB DDR3
  • Storage Expansion: Supports Micro SD (TF) cards up to 128GB
  • Wireless Network: Onboard 2.4GHz Wi-Fi
  • Peripheral Interfaces:
    • USB 2.0 × 2
    • FPC-TFT × 1
    • FPC-HDMI × 1
  • Expansion Interface: Reserved FPC interface, supports HDMI + USB single-cable connection
  • Pre-installed System: Comes pre-installed with Klipper, Moonraker, Mainsail/Fluidd, KlipperScreen, resonance compensation plugins, NumPy, etc. No need to change sources, simplifying the deployment process (requires a self-provided TF card).

Core Highlights​

  • Deep Optimization, Performance Boost Equipped with the Allwinner H3 quad-core processor, running deeply customized FlyOS & Klipper firmware, offering significant optimization in command processing and printing performance compared to native versions.

  • Ready Out of the Box, Complete Ecosystem Pre-installed with all essential plugins and components, eliminating complex debugging and greatly reducing the time from installation to the first print.

  • One-Click Updates, OTA Support Supports Over-The-Air (OTA) system updates, no need to re-flash the firmware, allowing for continuous access to the latest features and security patches.

Purchase and Usage Notes​

Important: Regarding Storage

The Fly-Pi-lite2 does not come with storage media. You must prepare your own storage card to use it:

  • Recommended to use a Micro SD (TF) card with a capacity of 16GB–128GB, with a speed class of C10 or higher.
Important: Regarding Power Supply

The Fly-Pi-lite2 does not support being powered by a lower-level controller (e.g., a mainboard). You must use an independent 5V power adapter to power the host. Failure to do so may cause device damage or operational issues.

Product Detailed Specifications​

1. Core System​

  • CPU: Allwinner H3, Quad-core Cortex-A7
  • GPU: Mali-400 MP2
  • RAM: 512MB DDR3

2. Storage and Expansion​

  • External Storage: Supports Micro SD (TF) cards up to 128GB

3. Interface Overview​

  • Display Output
    • FPC-HDMI × 1
    • FPC-TFT × 1
    • Supports TFT screens or connection via HDMI single-cable
  • USB and Network
    • USB 2.0 × 2
    • 2.4GHz Wi-Fi (Onboard)

4. System and Software​

  • Operating System: FlyOS-FAST (A lightweight system optimized for 3D printing)
  • Core Firmware:
    • Deeply optimized Klipper firmware, with improved motion planning and command processing performance
    • Native support for RRF (RepRapFirmware)
  • Pre-installed Software:
    • Core Components: Klipper, Moonraker
    • Web Interface: Mainsail / Fluidd (Fluidd by default)
    • Plugins & Features: KlipperScreen, Crowsnest (camera), Input Shaping, Resonance Compensation, etc. (NumPy is pre-installed)

Notes​

Regarding Wi-Fi

The Fly-Pi-lite2 only supports 2.4GHz Wi-Fi networks. It does not support 5GHz or dual-band combined networks.

Loading...