Super8 Pro

Product Specifications

Utilizes the 32-bit 550 MHz ARM Cortex-M7 series STM32H723ZGT6 main control chip
Firmware: Marlin 2.0/Reprap/Klipper
Driver support: A4988, LV8729, DRV8225, TMC2208/2209/5160, etc.
Driver mode support: TMC: UART/SPI
8 high-voltage driver slots, supports 8 independent motor drivers, 5 extruders, 10 PWM fans
Display: Serial touch screen, mini12864 LCD, 12864 LCD, 2004 LCD, FLY 4.3/7.0 V1
1 high-voltage IN port, supports auto bed leveling sensors: BLTouch, PL08N and other proximity sensors, Klicky, Voron Tap, etc.
Optional limit switch power supply: 5V/12V/24V
Using Reprap firmware, onboard ESP32 WiFi module can be used, supports up to 1.6m/s
Unique PWM Fan MOS board design, replaceable directly if damaged, reducing maintenance difficulty for customers; two 2-pin fan interfaces can support 4-pin PWM fans
PCB uses 2OZ copper thickness to support higher currents
6 ADC interfaces, supports up to six thermistors
8 IO interfaces, can be used for leveling and end stops
5 heater cartridge interfaces, supports up to five heater cartridges
2 PWM interfaces

Output Port	Maximum Current at 24V Power Supply	Maximum Current at 12V Power Supply
Heated Bed Port	15A	7.5A
Heating Port	6A	3A
Fan Port	1A	0.5A