Tip

• Super5 Pro uses a TF card for firmware flashing by default.
• Please prepare a TF card with a capacity of no more than 32GB.
• Off-brand memory cards may cause flashing failures; it is recommended to use the memory cards suggested below for updating the firmware.
• The TF card should have a transfer speed of at least class10 or higher. It is recommended to use TF cards from brands like SanDisk.

Firmware Flashing Instructions

Tip

• Super5 Pro comes pre-flashed with the TF card bootloader, so there is no need to flash it again yourself.

How to Determine Which Firmware You Need

Tip

• Please note that you only need to flash one of the firmware options.

• Super5 Pro can connect to the host computer in the following ways:
• USB Firmware
  • Advantages: Reliable and stable communication.
  • Disadvantages: May affect data transmission if multiple USB devices are connected.
• USB Bridge Firmware
  • Advantages: Can connect multiple devices without occupying a USB port.
  • Disadvantages: May cause errors such as homing timeouts when used together with KlipperScreen.