Super5 Pro
Loading...
Product Specifications
- Utilizes the 32-bit ARM Cortex-M7 series STM32H723ZGT6 main control chip with a clock speed of 550 MHz
- Firmware: Marlin 2.0 / Reprap / Klipper
- Driver Support: A4988, LV8729, DRV8225, TMC2208/2209/5160, etc.
- Driver Mode Support: TMC: UART / SPI
- 5 high-voltage driver slots, supporting 5 independent motor drivers
- Display: Serial touchscreen, mini12864 LCD, 12864 LCD, 2004 LCD, FLY 4.3/7.0 V1
- 1 high-voltage IN port, supports auto-bed leveling sensors: BLTouch, PL08N proximity sensors, Klicky, Voron Tap, etc.
- Optional limit switch power supply: 5V / 12V / 24V
- When using RepRap firmware, the onboard ESP32 WiFi module can be utilized, supporting speeds up to 1.6 m/s
- Unique PWM Fan MOS board design allows for direct replacement if damaged, reducing repair difficulty for customers. Two 2-pin fan interfaces can support 4-pin PWM fans.
- PCB uses 2OZ copper thickness, capable of supporting higher currents.
- 3 ADC interfaces, supporting up to three thermistors.
- 7 IO interfaces, usable for leveling and limit switches.
- 3 heater cartridge interfaces, supporting up to three heater cartridges.
Important Notes
| Output Port | Max Current at 24V Power Supply | Max Current at 12V Power Supply |
|---|---|---|
| Heated Bed Port | 15A | 7.5A |
| Heater Port | 6A | 3A |
| Fan Port | 1A | 0.5A |
Loading...