Firmware Flashing Instructions

Important Notes

• PRO X10 comes pre-flashed with Katapult.
• Once the Bootloader (BL) has been flashed, there is no need to flash it again later.
• The PRO X10 has two types of Bootloader: the Katapult firmware and the BL firmware for TF card flashing.
• If needed, you can choose to re-flash the Bootloader firmware according to your preference.

Please Note

• To flash the mainboard firmware, you need to use Katapult to flash Klipper.
• If you are certain that the mainboard already has Katapult flashed, you do not need to perform the Katapult firmware flashing step at the end.
• You can quickly press the reset button twice to see if an LED on the mainboard starts blinking. If it does, it indicates that the mainboard has entered the Katapult firmware.

How to Determine Which Firmware You Need

Tip

• Please note that you only need to flash one of the following firmware types.

• The Pro X10 can connect to the host computer using the following methods:
• USB Firmware
  • Advantages: Reliable and stable communication.
  • Disadvantages: Multiple USB devices may affect data transmission.
• USB Bridge Firmware
  • Advantages: Can connect multiple devices without occupying a USB port.
  • Disadvantages: May cause errors such as homing timeouts when used together with KlipperScreen.

DIP Switch Instructions

Please Note the DIP Switch Status

Loading...

TF Card Slot Usage Instructions

Loading...