Camera Connection and Usage

Connection and Configuration Notes

• Connection Method: The D8 motherboard connects to an external camera via its USB-A port, which is then recognized and configured by the host computer.
• Camera Requirements: Please use a driverless, plug-and-play USB camera. Such cameras can be used directly in Klipper on Linux, Armbian, and other systems without requiring additional driver installation.
• Software Environment: This tutorial is based on the latest versions of Klipper, Crowsnest, and Fluidd. If you are using Mainsail or other tools, the configuration principles are similar. Please refer to their official documentation for specific steps.

Search for Camera ID

tip

• Ensure the camera is connected to the host computer.

• Click DEVICES above, then click VIDEO, and finally click refresh.
  Loading...
• Find path_by_id and copy the line following it.
  Loading...

Add ID

• Add the ID and save the configuration.
  Loading...

Enable Camera

• Click Settings, select Camera, and then click Add Camera.
  Loading...
• Enter a name you prefer and click Save.
  Loading...

Check if Enabled

• Click on the Dashboard. The camera feed should normally appear.
  Loading...
• If it does not display, restart the system again.