BL Firmware
tip
- Please note that the
bootloader
has already been pre-flashed at factory, no need to flash again - C8P can only use the built-in host software for flashing
SSH into the Host
Warning
- You need to
connect to the host via SSH using WiFi
before flashing the BL firmware
- First, please: Connect to the host via SSH using WiFi
Flashing Firmware
-
Switch the DIP switch upward and connect the device's USB to the host
-
Enter the command below to start flashing the BL
fly-flash -d auto -u -f /usr/lib/firmware/bootloader/hid_bootloader_h723_v1.0.bin
Loading...