BL Firmware

Tip

• Please note that the bootloader is pre-flashed at the factory, so no additional flashing is required.
• C8P can only be flashed using the built-in host.

SSH Connection to the Host

Warning

• Before flashing the BL firmware, you need to connect to the host via WiFi SSH.

• First, please: Use WiFi to Connect to the Host SSH

---

Flashing the Firmware

• Flip the DIP switch upward and connect the lower board's USB to the host.

  Loading...

• Enter the following command to start flashing the BL firmware:

  fly-flash -d auto -u -f /usr/lib/firmware/bootloader/hid_bootloader_h723_v1.0.bin

Loading...