BL Firmware

Tip

• Please note that the bootloader is pre-flashed at the factory and does not need to be re-flashed.
• C8P can only be flashed using the built-in host.

SSH into the Host

Warning

• Before flashing the BL firmware, you need to connect to the host via SSH over WiFi.

• First, please: Use WiFi to Connect to Host SSH

---

Flashing the Firmware

• Flip the DIP switch upward, and connect the lower computer's USB to the host.

  Loading...

• Enter the command below to start flashing the BL firmware.

  fly-flash -d auto -u -f /usr/lib/firmware/bootloader/hid_bootloader_h723_v1.0.bin

Loading...