BL Firmware

Tip

• Please note that the bootloader is pre-flashed at the factory; no additional flashing is required.
• The C8P can only be flashed using its own host computer.

SSH Connection to the Host Computer

Warning

• Before flashing the BL firmware, use WiFi to connect to the host computer via SSH.

• First, please: Connect to the host computer via SSH using WiFi

---

Flashing the Firmware

• Push the DIP switch upward and connect the lower computer to the host computer via USB.

  Loading...

• Enter the following command to start flashing the BL firmware.

  fly-flash -d auto -u -f /usr/lib/firmware/bootloader/hid_bootloader_h723_v1.0.bin

Loading...