Skip to main content

How to Adjust the Module Trigger Value

Video Tutorial​

Loading...

Connect the Module​

  • The module can only be used after wiring and entering the command below.

Enable the Leveling Module​

  • In the Klipper console, send SET_PIN PIN=_probe_ready VALUE=1 and observe the trigger indicator light. Then enter the following command:
  • After entering this command, you can touch the nozzle with a metal object. If the indicator light turns on, it indicates normal triggering.
  • For non-metallic objects, please note the hotend temperature.
SET_PIN PIN=_probe_ready VALUE=1
Loading...

Adjust the Pressure Value​

  • Use the Configuration Tool for configuration.
  • Connect the module to the computer using a USB data cable. Open the serial port tool assistant, select the corresponding port number, and click Connect.
Loading...
Loading...