Skip to main content

Connect to RRF

Important Note
  • AirClick must be connected to the same network as the target printer
  1. Click System Settings on the left
Loading...

  1. Select RRF for Printer Type

  2. Enter the IP address of the RRF machine in RepRapFirmware IP

    Loading...

  3. After configuring as shown above, click Submit at the bottom right to save the configuration

  4. Once connected successfully, a prompt will appear at the top of the webpage

    Loading...

  5. If the connection fails

    • Check if the IP address is correct
    • Check if the printer and AirClick are connected to the same network
    • Check if the RRF motherboard is running normally
    • Whether the browser can open the RRF webpage
Loading...