Skip to main content

Connect to RRF

Important Note
  • AirClick must be connected to the same network as the target printer.
  1. Click on System Settings on the left side.
Loading...

  1. In Printer Type, select RRF.

  2. In RepRapFirmware IP, enter the IP address of the RRF machine.

    Loading...

  3. After configuring as shown above, click Submit at the bottom right to save the settings.

  4. If connected successfully, a notification will appear at the top of the webpage.

    Loading...

  5. If the connection fails:

    • Check if the IP address is correct.
    • Verify that the printer and AirClick are connected to the same network.
    • Ensure the RRF mainboard is running normally.
    • Check if the RRF webpage can be opened in a browser.
Loading...