Skip to main content

Connecting to Klipper

Important Note
  • AirClick must be connected to the same network as the target printer
  1. Click on System Settings on the left
Loading...

  1. Select Klipper for Printer Type

  2. Enter the IP address of the Klipper machine in Moonraker IP

  3. Enter the port of the Klipper host in Moonraker Port, default is 7125. If the host uses a different port, you need to enter the corresponding port manually

  4. Ignore Apikey, it is not supported for now

    Loading...

  5. After configuring as shown above, click Submit at the bottom right to save the configuration

  6. A prompt will appear at the top of the webpage when the connection is successful

    Loading...

  7. If the connection fails

    • Check if the IP address and port are correct
    • Check if the printer and AirClick are connected to the same network
    • Check if the Klipper host is running properly
    • Check if the browser can open the Klipper host webpage
Loading...