Pause/Cancel Print Custom Position

• You need to add [include mainsail.cfg] or [include fluidd.cfg] in printer.cfg for this to take effect.
• Add the macro below to your printer.cfg.

Important Notes

• False means not enabled!
• The gcode: in the configuration file must be retained and cannot be deleted.

Chinese Translation

[gcode_macro _CLIENT_VARIABLE]
### Custom settings related to the pause macro
variable_use_custom_pos   : False ; Whether to use custom x, y parking coordinates [True/False]
variable_custom_park_x    : 0.0   ; X position when pausing the print
variable_custom_park_y    : 0.0   ; Y position when pausing the print
variable_custom_park_dz   : 2.0   ; Distance to raise Z when pausing the print (unit: mm)

### Custom settings related to the cancel macro
variable_park_at_cancel   : False ; Whether to allow moving the toolhead to the parking position when executing the cancel print macro [True/False]
variable_park_at_cancel_x : None  ; X position after canceling the print
variable_park_at_cancel_y : None  ; Y position after canceling the print

### Extruder actions during pause and cancel
variable_retract          : 1.0     ; Extruder retraction length when pausing print (mm)
variable_cancel_retract   : 5.0     ; Extruder retraction length when canceling print (mm)
variable_speed_retract    : 35.0    ; Extruder retraction speed (mm/s)
variable_unretract        : 1.0     ; Extrusion length when resuming print
variable_speed_unretract  : 35.0    ; Extruder extrusion speed (mm/s)
variable_speed_hop        : 15.0    ; Z-axis movement speed (mm/s)
variable_speed_move       : 100.0   ; Movement speed (mm/s)

### Motor and heater shutdown configuration
### One day is 86400 seconds
variable_idle_timeout     : 86400  ; Idle timeout in seconds before activation. Setting to 0 means no value will be set or restored.

# !!!Note: If you set use_fw_retract: True, then [firmware_retraction] must be defined in printer.cfg!!!
variable_use_fw_retract   : False ; Whether to use firmware retraction instead of the manual version [True/False]
variable_runout_sensor    : ""    ; If a sensor is defined, it will be used to cancel the execution of RESUME when no filament is detected.
#                                Specify the config name of the runout sensor, e.g., "filament_switch_sensor runout". Hint: Use the same as in your printer.cfg.
# !!!Custom macros, please use with care and review the corresponding macro section. These macros are for simple operations like setting a status LED. Ensure your macro does not interfere with the basic macro functions. Only single-line commands are supported; create a macro if you need multiple commands.
variable_user_pause_macro : ""    ; Everything inside the "" will be executed after the Klipper base pause (PAUSE_BASE) function.
variable_user_resume_macro: ""    ; Everything inside the "" will be executed before the Klipper base resume (RESUME_BASE) function.
variable_user_cancel_macro: ""    ; Everything inside the "" will be executed before the Klipper base cancel (CANCEL_PRINT_BASE) function.
gcode:

English (Original)

[gcode_macro _CLIENT_VARIABLE]
variable_use_custom_pos   : False ; use custom park coordinates for x,y [True/False]
variable_custom_park_x    : 0.0   ; custom x position; value must be within your defined min and max of X
variable_custom_park_y    : 0.0   ; custom y position; value must be within your defined min and max of Y
variable_custom_park_dz   : 2.0   ; custom dz value; the value in mm to lift the nozzle when move to park position
variable_retract          : 1.0   ; the value to retract while PAUSE
variable_cancel_retract   : 5.0   ; the value to retract while CANCEL_PRINT
variable_speed_retract    : 35.0  ; retract speed in mm/s
variable_unretract        : 1.0   ; the value to unretract while RESUME
variable_speed_unretract  : 35.0  ; unretract speed in mm/s
variable_speed_hop        : 15.0  ; z move speed in mm/s
variable_speed_move       : 100.0 ; move speed in mm/s
variable_park_at_cancel   : False ; allow to move the toolhead to park while execute CANCEL_PRINT [True/False]
variable_park_at_cancel_x : None  ; different park position during CANCEL_PRINT [None/Position as Float]; park_at_cancel must be True
variable_park_at_cancel_y : None  ; different park position during CANCEL_PRINT [None/Position as Float]; park_at_cancel must be True
# !!! Caution [firmware_retraction] must be defined in the printer.cfg if you set use_fw_retract: True !!!
variable_use_fw_retract   : False ; use fw_retraction instead of the manual version [True/False]
variable_idle_timeout     : 0     ; time in sec until idle_timeout kicks in. Value 0 means that no value will be set or restored
variable_runout_sensor    : ""    ; If a sensor is defined, it will be used to cancel the execution of RESUME in case no filament is detected.
#                                   Specify the config name of the runout sensor e.g "filament_switch_sensor runout". Hint use the same as in your printer.cfg
# !!! Custom macros, please use with care and review the section of the corresponding macro.
# These macros are for simple operations like setting a status LED. Please make sure your macro does not interfere with the basic macro functions.
# Only  single line commands are supported, please create a macro if you need more than one command.
variable_user_pause_macro : ""    ; Everything inside the "" will be executed after the klipper base pause (PAUSE_BASE) function
variable_user_resume_macro: ""    ; Everything inside the "" will be executed before the klipper base resume (RESUME_BASE) function
variable_user_cancel_macro: ""    ; Everything inside the "" will be executed before the klipper base cancel (CANCEL_PRINT_BASE) function
gcode: