Introduction
FLY SHT36/42 is a nozzle toolboard designed by Guangzhou Magnon Electronics Technology Co., Ltd. for 3D printer extruders. Using this toolboard, four wires can replace the complex wiring between the original motherboard and the print head, optimizing the layout. SHT36 is suitable for 36 stepper motors, while SHT42 is suitable for 42 stepper motors. It integrates a CAN transceiver, USB port, TMC2209 driver, ADXL345 accelerometer, two controllable fans, and other functional modules. This toolboard is compatible with Klipper firmware.
SHT36/42 Firmware Compilation and Flashing
3 items
Tool Board ID Reading and Viewing
* Before searching for the ID, connect the tool board to the UTOC or a mainboard flashed with bridge firmware using an XT30 data cable. Refer to the wiring diagram below.
Motherboard Wiring
Attach the included blue heatsink to the 2209 driver!!!
参考配置
Accelerometer Usage
Usage Tutorial
D Models and Schematics
* This document provides the following resources: