Introduction
The FLY-SHT36-LIS3DH is a nozzle tool board designed by Guangzhou Meilun Electronics Technology Co., Ltd. for the extruder of 3D printers. By using this tool board, four wires can replace the complex wiring between the original motherboard and the print head, optimizing the layout. The FLY-SHT36-LIS3DH is suitable for 36 stepper motors and integrates a CAN transceiver, USB port, TMC2209 driver, LIS3DH acceleration sensor, two controllable fans, and other features. This tool board is compatible with the Klipper firmware.
SHT36 LIS3DH Firmware Compilation and Flashing
3 items
Tool Board ID Reading and Viewing
* Before searching for the ID, connect the tool board to a UTOC or a mainboard with bridge firmware using an XT30 data cable. Refer to the wiring diagram below:
Motherboard Wiring
The included blue heatsink should be attached to the driver!!!
参考配置
Accelerometer Usage
Update Klipper
D Models and Schematics
* This document provides the following resources: