Introduction
Product Features
Firmware Burning
Start Compilation
Motherboard ID Reading and Viewing
* This tutorial is for reading and viewing the ID of the motherboard. For tool boards, please refer to the corresponding product's ID search tutorial.
Pinout
- This page lists the pinout of the FLY-RPFMEX mainboard after flashing Klipper firmware. Pin numbers are based on the mainboard schematic.
参考配置
文档中出现的所有*包裹的内容需要按照自己实际的修改
Bootloader Recovery (Unbricking)
The FLY-RPFMEX is pre-flashed with Katapult at the factory. Do not repeatedly flash the firmware on this page during normal use and Klipper firmware updates; this page is only for unbricking recovery after the Bootloader is damaged.
3D Model and Schematic Diagram
* This document provides the following: