📄️ Firmware Flashing and Onboard DIP Switch Instructions
How to Determine Which Firmware You Need
📄️ USB Firmware Flashing
Check the DIP Switch
📄️ USB Bridge CAN Firmware Flashing
SSH into the Host Computer
📄️ Read and View Mainboard ID
- This tutorial is only applicable to the Mainboard ID reading and viewing methods.
📄️ Connect the Toolboard and Search for ID
This tutorial specifically covers the wiring and ID search for the Toolboard. The related steps are not applicable to the Mainboard*. Please distinguish between them.
📄️ BL Firmware, Do Not Use!
* Please note that the bootloader is pre-flashed at the factory, so no additional flashing is required.