📄️ Firmware Flashing and Onboard DIP Switch Instructions
How to Determine Which Firmware You Need
📄️ USB Firmware Flashing
Check the DIP Switch
📄️ USB Bridge CAN Firmware Flashing
SSH Connect to the Host
📄️ Read and View Mainboard ID
- This tutorial is only applicable to the mainboard ID reading and viewing methods.
📄️ Connect Toolboard and Search for ID
This tutorial specifically covers the wiring and ID search for the Toolboard*. The related steps are not applicable to the Mainboard. Please distinguish between them.
📄️ BL Firmware, Do Not Use!
* Please note that the bootloader is pre-flashed at the factory and does not need to be re-flashed.