📄️ Firmware Burning Instructions
How to Determine Which Firmware You Need
📄️ On-board DIP switch instructions
* FLY C8P uses DIP switches to select the connection method between the lower machine and the upper machine. If the DIP switch position is incorrect, the on-board lower machine may not be usable !!!
📄️ USB Firmware Flashing
Check the DIP Switch
📄️ USB to CAN Bridge Firmware Flashing
SSH into the Host Machine
📄️ BL Firmware, Do Not Use!
* Please note that the bootloader has already been pre-flashed at factory, no need to flash again