Power Recovery

Configuration Method

• Supports power recovery and power recovery mode selection. You can choose to recover by layer or resume from the power loss point

  
  

• Add the following code in Configuration.h

#define FLY_POWER
#define FLY_POWER_LOSS_PING   PB11
#define FLY_POWER_LOSS_STATE  HIGH

• Add the following code in Marlin\src\MarlinCore.cpp

#if ENABLED(FLY_POWER)
//    if (printJobOngoing() && (READ(FLY_POWER_LOSS_PING) == FLY_POWER_LOSS_STATE)){
if ( (READ(FLY_POWER_LOSS_PING) == FLY_POWER_LOSS_STATE)){
    WRITE( FLY_BEEP_PING , HIGH );

    // thermalManager.;
        static millis_t send_power_ms = 0;
        const millis_t power_ms = millis();
    if((power_ms - send_power_ms ) >= 200){
            thermalManager.setTargetBed(0);
            SERIAL_ECHOLNPGM("power_LOSS");
            //queue.inject_P(PSTR("M81"));
            send_power_ms = millis();
    }
    }

#endif