Skip to main content

FLY-Pi Usage Notes

1. Power Supply Requirements​

  • First Boot: Must use a 5V/2A or higher power adapter. Some computer USB ports may not provide sufficient power, which could cause the system's initial automatic expansion to fail.
  • Operating Voltage: The host supports DC 12V-24V input.

2. Storage Configuration​

Important

FLY-Pi does not come with any storage device (i.e., it does not include an M2WE module or a Micro SD card). You must configure at least one of the following storage media for the device to function properly:

  • Option 1 (Recommended): Purchase a FLY custom M2WE module for faster system response and higher reliability.
  • Option 2: Use your own Micro SD (TF) card with a capacity between 16GB and 128GB.

3. Power Consumption & Interfaces​

  • Input Voltage: DC 12V-24V
  • Fan Interface: 5V fan interface x 1
  • Power Loss Protection Function:
    • Requires a KPPM module.
    • Supports power loss recovery and safe power-off shutdown.
    Configuration Note

    This function needs to be manually configured and enabled within the system; it is disabled by default.

4. Important Warnings​

Interface Conflict Warning

Do NOT use the TFT screen and the SPI accelerometer interface simultaneously!

  • Conflict Reason: The TFT screen interface (FPC-TFT) and the SPI accelerometer interface (ZH1.5-6P) share the same set of SPI resources on the hardware.
  • Consequence: If both are connected, it will cause abnormal screen display and severely incorrect accelerometer data.
  • Solution: Ensure only one of these devices is connected and used at a time.
Loading...