Skip to main content

🚀 Quick Start

🎯 Guide Objective: Complete the system deployment and firmware flashing of the Fly-PI motherboard within 30 minutes, making it ready to connect to Klipper and perform basic tests.
✅ Completion Indicator: Access the Klipper interface via a web browser.

📍 Important Notes
  • 📦 Required Accessory: The Fly-PI V3 must be used with Fly-M2WE or a TF card, otherwise the system will not start.
  • ⚡ Power Requirements: Input voltage range 12V-24V, do not exceed this range.
  • 🔌 Safe Operation: Ensure the power is disconnected before any wiring operations! Also, follow the guide's instructions when flashing firmware.
  • 🔧 Tool Preparation: Prepare basic tools such as screwdrivers and data cables in advance.

📦 Step 1: Prepare Tools and Resources​

Loading...


📝 Contents
  • MobaXterm (for connecting to the host machine)
  • CH340 (serial port driver for system connection)
  • Panasonic_SDFormatter (for formatting the TF card)
  • SetupSTM32CubeProgrammer (for flashing firmware to the subordinate machine)

🖥️ Step 2: Install System and Basic Configuration​

1. System Image Flashing​

2. Basic System Configuration​

3. Network and Remote Connection​

4. Display Device Configuration​

5. Powering the Host Machine​


📝 Notes for this Step
  • Confirm the TF card or M2WE is correctly formatted before flashing the image.
  • The first boot of the system may take 3-5 minutes, please be patient.
  • Default username for SSH connection: root, password: mellow.
  • Screen configuration is only needed when a screen device is present.

📈 Step 3: Extended Functions and Advanced Configuration (Optional)​

The following functions can be configured step by step as needed after completing the basic setup and ensuring the printer is running normally:

Camera Usage​


External Tool Board​

External Fan​

Resource Downloads​

  • It is recommended to configure and test extended functions one by one, avoiding simultaneous changes to too many parameters.
  • Camera configuration requires an additional USB camera device.
  • Resonance compensation requires an accelerometer sensor.
  • Tool board connection is suitable for multi-toolhead 3D printers.
Loading...