Screen

Determine the Screen

Screen Configuration

FLYOS-FAST System - Screen Configuration

FLYOS-FAST System - Screen Configuration

1. Open the device IP address in a browser, for example: http://192.168.6.110/

   For fluidd, as shown below: Uncheck -> Filter hidden files and folders.

   For mainsail, as shown below: Check -> Show hidden files.

2. You can now see the .flyos-config folder. Enter this folder and you will find a sys-config.conf file.

3. Open the sys-config.conf file, modify the required configuration items, then Save -> Close.

warning

• For resistive screens, configure as: fly-minipad-r. Please note there must be no space after the = sign!!!
• For capacitive screens, configure as: fly-minipad-c. Please note there must be no space after the = sign!!!
• For klipper_screen, configure as: 1. Please note there must be no space after the = sign!!!
• Note: The configuration format in the sys-config.conf file is key=value. Do not change the format arbitrarily!!! Otherwise, the configuration will not take effect!!!

4. After saving the changes, restart the system for the changes to take effect.

FLYOS-Armbian System - Screen Configuration

FLYOS-Armbian System - Screen Configuration

info

• Connect the host computer to WiFi and obtain the host's IP address. Then enter IP:9999 in your browser to access FLY TOOLS and configure the screen.
• For example, if the host computer's IP address is 192.168.6.110, then you need to enter 192.168.6.110:9999 in your browser.

1. Open FLY TOOLS. As shown in the figure below, enable Klipper Screen, select the screen model, and click the pink button at the bottom right corner Save Configuration. Then restart the host computer for the changes to take effect!

Resistive screen:

Capacitive screen:

2. After saving the configuration, restart the host computer for the changes to take effect!

---