Skip to main content

Screen Wiring and Configuration

Screen Wiring​

Important Safety Notice
  • When using FPC cables to connect TFT or HDMI screens, ensure the device is completely powered off to prevent screen damage
  • When wiring TFT screens, carefully confirm the insertion direction of the FPC cable to avoid device malfunction due to reverse connection

TFT Resistive Screen Cable Wiring​

Tip
  • Pay attention to the cable connection sequence to ensure correct alignment
  1. TFT Screen Installation Diagram
  • Pinout Reference
Loading...
  • Connection Method
Loading...

Screen Configuration​

FLYOS-FAST System Screen Configuration​

  1. Access the device IP address via a browser, e.g., http://192.168.6.110/

fluidd Interface: Uncheck "Filter hidden files and folders"

Loading...

mainsail Interface: Check "Show hidden files"

Loading...
  1. Enter the displayed .flyos-config folder and locate the sys-config.conf configuration file
Loading...
  1. Edit the sys-config.conf file and modify the corresponding configuration items based on the screen type
  • Change screen= to fly-tft-v1
  • To use FLY Screen, set klipper_screen=0; if both klipper_screen=1 and fly_screen=1 are enabled, KlipperScreen will be used by default
  • Change fly_screen=0 to fly_screen=1
  • Reference after modification:
screen=fly-tft-v1
  • Also modify:
klipper_screen=0
fly_screen=1
Loading...
Configuration Notes
  • Ensure the DIP switch on the back of the screen is correctly set: For resistive screens, set to Resi
  • The configuration file format must be key=value, with no spaces after the equals sign
  • Do not modify the configuration file format arbitrarily, or the configuration will not take effect
  1. After saving the configuration
Important Notice

After modifying the configuration, restart the system to apply the changes

Loading...