System Configuration Guide
- This guide will walk you through the basic configuration of the FlyOS-Fast system, helping you get started quickly and optimize your user experience.
Configuration Methods
- System Configuration via Config Myprint Software
- System Configuration via Browser
1. Config Myprint Software Configuration
- Open the Config Myprint software for configuration.
- After connecting the system card to the computer, the software will automatically recognize the system card.
✅ Operation Tip: After completing the selection and modification of all configuration items, be sure to click the Manual Write Configuration button to ensure all settings are correctly saved to the system card.
1. Enable Configuration Function
Click the Enable System Configuration switch to activate the system configuration options.
2. Basic Settings
Configuration File Management
- Only supports selecting folders
- Configuration files within the selected folder will be automatically copied to the system card
- Configurations will be automatically loaded upon system startup
Wi-Fi Network Configuration
Enter the available Wi-Fi name and password to configure the device's network connection.
Web Interface Selection
Currently supports the following web UIs:
- Fluidd - Lightweight Klipper web interface
- Mainsail - Feature-rich Klipper web interface
Display Settings
Configure display parameters according to the connected monitor type.
3. Advanced Settings
Device Identification
Set a personalized printer name for easy network identification.
Camera Function
Configure camera service parameters to enable video monitoring functionality.
Regional Settings
Set the system language and corresponding time zone to ensure accurate time display.
Communication Settings
Configure the CAN bus transmission rate to optimize communication between devices.
Friendly Reminder: After completing all configurations, safely eject the storage card, then insert it into the target device to start the system.
- When using a browser for system configuration, please ensure your device is connected to the same network to successfully access the configuration interface.
- It is necessary to install the system card and boot the system according to the SSH connection host computer tutorial, then access the system IP address via the browser for configuration.
- Please read the following content first to understand how to modify the configuration files of the FlyOS-Fast system.
- Ensure that the system can boot normally.
- After connecting to the device via Ethernet cable or WiFi, modify the configuration through a browser.
Important Notes
- The
partialsettings in the configuration file will only take effect during the first system startup after flashing. - Due to the complexity of the configuration process, it is strongly recommended to connect to the machine via network and configure through a browser.
- This tutorial only provides modifiable options.
- It is recommended to use the
mainsailorfluiddweb interfaces for configuration modifications. - Please do not enable webpage translation, as saving after translation may prevent the system from starting.
- It is best not to input Chinese characters or special symbols in the configuration file.
- After modifying the configuration file, a system restart is required for the changes to take effect.
- Do not modify the content below
######### PLEASE DO NOT EDIT THE FOLLOWING #########in the configuration file.
How to Modify the Configuration File
Modifying the Configuration File After Flashing
- Configuration items that only take effect during the
first startupmust be modified by opening the configuration fileconfig.txtin the removable diskFlyOS-Confusing a professional text editor after flashing is completed.
Online Configuration Modification After System Startup
-
For general configuration items, modifications can be made through the system's web configuration page, followed by a system restart to take effect.
- Open the device's IP address in a browser, for example:
192.168.1.2/. - In fluidd, as shown in the left image below,
uncheck->Filter hidden files and folders. - In mainsail, as shown in the right image below,
check->Show hidden files.
Loading...Loading...- At this point, you will see the
.flyos-configfolder. Enter this folder to find thesys-config.conffile. - The
sys-config.conffile is a soft link to the configuration fileconfig.txtin the removable diskFlyOS-Conf.
Loading...- Open the
sys-config.conffile, modify the required configuration items, thensave->close, and restart the system.
Loading...- Note: The format of configuration items in the
sys-config.conffile iskey=value. Do not change it tokey: value. - After making modifications and saving, restart the system for the changes to take effect.
- Open the device's IP address in a browser, for example:
Configuration Items
🛠️ System Configuration Guide
Welcome to the System Configuration Guide! This guide will help you easily set up your device.
📶 Wireless Network Settings
These settings take effect automatically every time the device boots up.
| Configuration Item | Default Value | Optional Values | Description |
|---|---|---|---|
WIFI_SSID | Empty | Your WiFi network name | After filling this in, the device will automatically connect to this WiFi network on startup. |
WIFI_PASS | Empty | Your WiFi password | If your WiFi has a password, please enter it here. |
💡 Tip: Both fields must be filled in to successfully connect to WiFi.
🖨️ Basic Printer Settings
✨ Important Reminder: These settings only take effect during the first boot, and modifications afterward will not apply.
| Configuration Item | Default Value | Optional Values | Description |
|---|---|---|---|
language | zh-CN (Chinese) | Chinese, English, Japanese, German, and 18 other languageszh-CN, zh-HK, en, de, cz, es, hu, ja, nl, pt, se, uk, da, fr, it, ko, pl, ru, tr | Set the display language for the web control interface. |
printer_name | Empty | Any name (e.g., "My 3D Printer") | Give your printer a name for easy identification. |
⚙️ Basic System Configuration
These settings take effect automatically every time the device boots up.
| Configuration Item | Default Value | Optional Values | Description |
|---|---|---|---|
board | Auto-detected | Automatically identified by the system; do not modify | Your motherboard model, automatically recognized by the system. |
localtime | Asia/Shanghai | Various time zones worldwide | Set your time zone. The time will automatically sync after connecting to the network. |
canbus_bitrate | 1000000 | 1000000 (Recommended)500000250000 | Set the communication speed for CAN bus devices. Generally, keep the default value. |
🖥️ Screen Display Settings
The following settings are automatically applied every time the device boots up.
| Configuration Item | Default Value | Optional Values | Description |
|---|---|---|---|
screen | hdmi | none: Disable all screen displayshdmi: HDMI interface displayfly-tft-v2-r: FLY-TFT V2 resistive touchscreenfly-tft-v2-c: FLY-TFT V2 capacitive touchscreen | Select the screen type that matches your hardware. |
rotate | 90 | 0: No rotation90: Rotate 90 degrees clockwise180: Rotate 180 degrees270: Rotate 270 degrees clockwise | Adjust the display orientation of the FLY-TFT touchscreen. This setting does not apply to HDMI screens. |
klipper_screen | 0 | 0: Disabled1: Enabled | Whether to enable the KlipperScreen touch interface. Once enabled, you can directly operate the printer via the touchscreen. |
moon2uart | 0 | 0: Disabled1: Enabled | Whether to enable the FLY serial screen function. This function requires the FLY-WiScreen 7-inch screen. |
🔧 Klipper-Related Settings
These settings take effect automatically every time the device boots up.
| Configuration Item | Default Value | Optional Values | Description |
|---|---|---|---|
klipper_webui | fluidd | fluiddmainsail | Select the web control interface for Klipper. |
crowsnest | 0 | 0: Disabled1: Enabled | Whether to enable the camera monitoring function. |
🖨️ Printer Type Selection
These settings take effect automatically every time the device boots up.
| Configuration Item | Default Value | Optional Values | Description |
|---|---|---|---|
printer | klipper | klipper, rrf | Select the printer control system. - klipper: Common 3D printer system - rrf: Another control system |
🔌 Power Loss Protection and Shutdown Settings
The following settings are automatically applied every time the device boots up.
- Power Loss Recovery: After an unexpected power loss, printing can resume when power is restored.
- Power Loss Shutdown: Automatically and safely shuts down the system when a power loss is detected.
- Conflict: If you want to use Power Loss Recovery, you must disable the Power Loss Shutdown function.
| Configuration Item | Default Value | Optional Values | Description | Hardware Pin Mapping |
|---|---|---|---|---|
shutdown_pin_state | 0 | 0: High-level trigger1: Low-level trigger | Set the electrical detection method for the shutdown button. | |
shutdown_pin | none | Specific GPIO pinnone (Disable function) | Set the hardware pin connected to the shutdown button. | |
⚠️ Important Reminder
🛑 Do not modify the following content:
In the configuration file, do not modify any content below ######### PLEASE DO NOT EDIT THE FOLLOWING #########, as it may cause the system to malfunction.