E3 Pro
Loading...
Product Features
- 32-bit ARM Cortex-M4 series 168 MHz, STM32F407VGT6 chip
- Supports RRF firmware
Product Parameters
- 32-bit ARM Cortex-M4 series 168 MHz, STM32F40VZGT6 chip
- Firmware: Reprap/Klipper
- Onboard five TMC2209 drivers
- Display: Serial touchscreen, mini12864 LCD, 12864 LCD, 2004 LCD, FLY 4.3/7.0 V1
- 1 high-voltage IN port, supports auto bed leveling sensors: BLTouch, PL08N and other proximity sensors, Klicky, Voron Tap, etc.
- Using RepRap firmware, can use ESP32 WiFi module, supports 1.6m/s
- Unique PWM Fan MOS board design, can be directly replaced if damaged, reducing customer repair difficulty, four 2-pin fan interfaces
- PCB uses 2OZ copper thickness, capable of supporting higher current
- 2 ADC interfaces, supports up to two thermistors
- 4 IO interfaces, can be used for leveling and limit switches
- 3 heater cartridge interfaces, supports up to three heater cartridges
Precautions
| Output Port | Maximum Current at 24V Power | Maximum Current at 12V Power |
|---|---|---|
| Heated Bed Port | 15A | 7.5A |
| Heater Port | 6A | 3A |
| Fan Port | 1A | 0.5A |
Loading...