Extending the Driver for LED via Plugin

You need to connect to the host machine via SSH and follow the link below for installation and configuration

https://github.com/julianschill/klipper-led_effect

Installation

Please connect to your host machine via MobaXterm_Personal or other SSH tools through WIFI, and ensure the following points:

1. Ensure that the Klipper firmware is installed on the host machine
2. Ensure that the logged-in user is the one who has installed Klipper
3. Ensure that your input method is English
4. Ensure that your host machine can normally search for devices
5. Ensure all of the above precautions are met, otherwise the next step cannot be performed

This module can be installed into an existing Klipper installation using the installation script.

cd ~
git clone https://github.com/julianschill/klipper-led_effect.git
cd klipper-led_effect
./install-led_effect.sh

Reference Configuration

[neopixel TP_led]
pin: PB7
chain_count: 25
# Number of LEDs
# Number of LEDs
color_order: GRB
initial_RED: 0.4    
initial_GREEN: 0.8
initial_BLUE: 1
initial_WHITE: 0.0
#66CCFF 

[led_effect sb_nozzle_cooling]
autostart:              false
frame_rate:             24
leds:
    neopixel:TP_led (9,10)
layers:
        breathing  3 1 top (0.0, 0.0, 1.0, 0.1)

[led_effect rainbow]
leds:
    neopixel:TP_led
autostart:                          true
frame_rate:                         24
layers:
    gradient  0.3  1 add (0.3, 0.0, 0.0),(0.0, 0.3, 0.0),(0.0, 0.0, 0.3)