DIP Switch Introduction

tip

FLY c8 connects to the host machine via the DIP switch; if the position of the DIP switch is incorrect, it cannot be used normally.

Note

Please note that the DIP switch needs to be set to the specified position to connect to the host machine normally.

Connecting Onboard Host Machine

• Move DIP switches 1 and 2 to the right to connect the downstream device to the host machine via the built-in USB.
• Move DIP switches 3 and 4 to the left, otherwise it will affect the connection between the downstream device and the host machine.
  
• After moving the DIP switches in this way, the downstream USB port will be occupied by the downstream device. Please do not connect other devices.
  

Connecting External Host Machine

• Move DIP switches 3 and 4 to the right to connect the downstream device to the host machine via the built-in USB.
• Move DIP switches 1 and 2 to the left, otherwise it will affect the connection between the downstream device and the host machine.