BL Firmware

Tip

• Please note that the bootloader is pre-flashed at the factory and does not need to be re-flashed.
• C8 can only be flashed using the built-in host.

SSH into the Host

Warning

• Before flashing the BL firmware, you need to connect to the host via WiFi SSH.

• First, please: Use WiFi to Connect to the Host SSH

---

Press the Flash Button

Loading...

Flash the Firmware

• Enter the command below to start flashing the BL.
• You need to hold down the flash button while executing the code below.

  fly-flash -d auto -u -f /usr/lib/firmware/bootloader/hid_bootloader_f407_v1.0.bin

Loading...