Model Download and Print Assembly

Model Download and Instructions

Model File Name	Description
pcb_cover.stp	PCB Cover
switch_sensor_trigger_block.stp	Filament Runout Sensor Trigger Block
rear_cover.stp	Rear Cover
upper_cover.stp	Upper Cover
main_body.stp	Main Body of the Model
encoder_3_5.8mm.stp	Encoder Code Wheel, 3 Bands, Minimum Detection Distance 5.8mm `Use this for high flow rate (greater than 20 mm³/s) printing`
encoder_5_3.5mm.stp	Encoder Code Wheel, 5 Bands, Minimum Detection Distance 3.5mm `Moderate, recommended for use`
encoder_10_1.73mm.stp	Encoder Code Wheel, 10 Bands, Minimum Detection Distance 1.73mm `Use this for low-speed, high-precision printing` Limited by the sampling rate of the 3D printer firmware for filament detection.

Model Printing Notes

It is not recommended to print the housing using PETG or transparent materials, as they may affect sensor detection.