Firmware Update

Download Firmware

1. FLY-ALPS Pressure Module Firmware
   • Version: v1.0.5
   • Click the download link below
   • Loading...

Enter DFU Mode

• Connect the TYPE-C data cable to the computer
• Press and hold the BOOT button
• Press the RESET button
• Release the RESET button, then release the BOOT button
• The device is now in DFU mode
• Loading...

Start Flashing

Notice

To ensure successful STM32 flashing, please note the following:

• The USB port on some computers may cause unstable flashing due to driver or signal compatibility issues. It is recommended to try a different USB port for connection.
• If changing ports does not work, an effective solution is to connect via an external USB hub, which often improves compatibility.
• When the flashing software reports the error shown below, please also prioritize trying a USB hub. If the issue persists, check or use the host computer for flashing.
  Loading...

1. Flashing tool Download Link
2. You need to download SetupSTM32CubeProgrammer and STM32 DFU Driver
3. Download the firmware to any directory on your computer
4. Connect the motherboard to the computer using a Type-C cable, ensuring it has entered dfu flashing mode
5. In STM32CubeProgrammer, select USB mode, refresh, and connect
   Loading...
6. If no error popup appears, the connection is successful.
   Loading...
7. Click the download icon on the left and check the following options
   Loading...
8. Click Browse as indicated by the arrow, then select the firmware you need to flash
   Loading...
9. Set Start address to 0x08000000
   • Note: If the firmware is in HEX format, please skip this step!!
   Loading...
10. Click Start automatic mode below to begin flashing the firmware
    Loading...
11. The following prompt indicates that the firmware flashing is complete
    Loading...