Connect to WiFi

Important Notes

The onboard antenna of this product can only be used for receiving. The transmitting antenna needs to be installed separately, with the antenna terminal being ipex3.
Please ensure the antenna is properly installed!!! Otherwise, poor signal may cause severe overheating!!!
For first-time use, you need to manually connect to the AirClick hotspot before connecting to the corresponding WiFi.

Connect to WiFi via AirClick

Connect to the AirClick hotspot. The hotspot name is FLY-WBTN-XXXXXX.
Loading...
After connecting to the hotspot, access http://192.168.4.1/ via a browser.
The WiFi settings interface will then be displayed. You need to manually connect to the same router as the printer, enter the password, and click the blue box below to connect to WiFi.
Loading...
After connecting to WiFi, the IP address of AirClick after connecting to WiFi will be displayed. Click the blue box below to restart the device.
- The item circled in number 1 is the IP address of AirClick.
- The item circled in number 2 is to copy the IP and restart the device.
Loading...
Please note that you need to manually switch your current network to the corresponding router; otherwise, access will not be possible.
After a successful connection, it is recommended to power-cycle the AirClick.

Click the icon circled in the upper right corner and select your preferred language.
Loading...