Connect to WiFi

Important Notes

The onboard antenna of this product can only be used for receiving. The transmitting antenna needs to be installed by yourself. The antenna terminal is ipex3.
Please ensure the antenna is properly installed!!! Otherwise, poor signal may cause severe overheating!!!
For the first use, you need to manually connect to the AirClick hotspot first, then connect to the corresponding WiFi.

Connect AirClick to WiFi

Connect to the AirClick hotspot. The hotspot name is FLY-WBTN-XXXXXX.
Loading...
After connecting to the hotspot, access http://192.168.4.1/ via a browser.
The WiFi settings interface will be displayed. You need to manually connect to the same router as your printer, enter the password, and then click the blue box below to connect to WiFi.
Loading...
After connecting to WiFi, the IP address of AirClick will be displayed. Click the blue box below to restart the device.
- The area circled as number 1 shows the IP address of AirClick.
- The area circled as number 2 is to copy the IP and restart the device.
Loading...
Please note that you need to manually switch your current network to the corresponding router; otherwise, you will not be able to access it.
After a successful connection, it is recommended to power off and restart AirClick.

Click the icon circled in the upper right corner and select your desired language.
Loading...