Connecting to Network via SSH

Ensure the system is powered on and connected to the host computer via SSH using a serial port. MobaXterm_Personal is recommended.
Ensure the host computer has M2WE or a 2.4G WiFi module installed. For Lite2 and MiniPad, no module installation is required.
Note that the 2.4G WiFi module, Lite2, and MiniPad can only use 2.4G WiFi and do not support 5G WiFi.
Ensure the network does not use dual-band merging (band steering), as this may prevent proper connection.
Ensure the antenna is properly installed!!!

In the SSH software, enter the command nmtui and press Enter. The following interface will appear:

Select the network you wish to connect to, press Enter, enter the WiFi password, and then select OK to save and connect.

After connecting to WiFi, press the Esc key on the keyboard several times to exit the current interface. Then, enter ip a and press Enter.