断电续打

配置方法

• 支持断电恢复以及断电恢复模式选择，可以选择按层会恢复或掉电点恢复

  
  

• 在Configuration.h中添加下方代码

#define FLY_POWER
#define FLY_POWER_LOSS_PING   PB11
#define FLY_POWER_LOSS_STATE  HIGH

• 在Marlin\src\MarlinCore.cpp中添加下方代码

#if ENABLED(FLY_POWER)
//    if (printJobOngoing() && (READ(FLY_POWER_LOSS_PING) == FLY_POWER_LOSS_STATE)){
if ( (READ(FLY_POWER_LOSS_PING) == FLY_POWER_LOSS_STATE)){
    WRITE( FLY_BEEP_PING , HIGH );

    // thermalManager.;
        static millis_t send_power_ms = 0;
        const millis_t power_ms = millis();
    if((power_ms - send_power_ms ) >= 200){
            thermalManager.setTargetBed(0);
            SERIAL_ECHOLNPGM("power_LOSS");
            //queue.inject_P(PSTR("M81"));
            send_power_ms = millis();
    }
    }

#endif